Lubeco Mono 30 ®

 

 

  
     
The N°1 Diesel, Anti-Wear, Multi-Performance & Anti-Pollution MONOGRADE & MULTIGRADE Engine Oil for professional use
 

Zoom
Monograde : LUBECO ® MONO 30 top quality mineral oil has been specifically formulated for Fixed Heavy Diesel Engine in Earth moving & Handling Equipments, Locomotive & marine applications, either normally aspirated, turbo or supercharged or not & with specific high power.
 
Multigrade : LUBECO ® Max 15W40, top quality mineral engine oil & LUBECO ® Max 10W40 Evolution, low ash synthetic engine oil have been specially formulated for high power engine fitted on Heavy Diesel Vehicle equipped with post treating system of last generation & designed for long lasting maintenance according new manufacturers’ standards. (from 80.000 to 120.000 km)

 

  
Anti-pollution :
Diesel : Average reduction of exhaust fumes by 40% under governor load.
 
Savings :
Proven Reduction in fuel consumption by 5 to 10% & oil top-ups by 70 to 100%.
 
Anti-wear :
The remnant lubrication improves cold start, responsible for over 70% of engine wear, thereby increasing mechanical life span.
 
Performance :
Equalises & optimises compression levels, improves take-up at low speeds. Prevents lacquer formation & eliminates calamine build-up at the ring grooves. Protects the cylinder sleeves against icing.
 
LUBECO ® MONO 30 is available for Professional Use in 1000 L plastic container on pallet (120x120).                                                  
 
Produced to International Standards :
API : SJ / > CH-4 - ACEA : B4 / > E3 & E5 - MB : 228.2 - MACK : EO-M Plus - MTU : MTL 5044 Type 2
 
LUBECO ® Max 15W40 & LUBECO ® Max 10W40 Evolution are available for professional use in 208L drum on pallet (120 x 120) by 4 units & 1000 Litres plastic container on pallet (120 x 120)
 
Produced to International Standards :
For LUBECO ® Max 15W40 : API : SJ/CI-4 - ACEA : A3/B4/E7 - Cummins : CES 20076 & 20077 - MB : 228.3 - Mack EO-M Plus - MAN : 3275 - RVI : RLD 99 - VOLVO : V.D.S-2
 
For LUBECO ® Max 10W40 Evolution : API : SL /CH-4 - ACEA : A3/B4/E7 - Cummins : CES 20076 & 20077 - MB : 228.5 - Mack EO-M Plus - MAN : 3277 Low Ash - RVI : RXD - VOLVO : V.D.S-3
 
LUBECO ® MONO 30, MAX 15 W 40 & MAX 10 W 40 EVOLUTION are compatible with all conventional Engine oil & can be used irrespective of age, mileage or engine trademarks in all seasons & for all driving conditions.
 
With respect to conventional Engine oils for Professional Use, LUBECO ® MAX 10 W 40 EVOLUTION, MAX 15 W 40 & MONO 30 provide 22 identifiable performances.
 
To choose the right lubricant, follow manufacturer specifications. Without recommendation, please consult us.